|
Product Details:
|
| Material: | GI | Thickness: | 1.5mm To 2.0mm |
|---|---|---|---|
| Recoiler Motor: | 5.5KW | Control System: | PLC Control System |
| Press: | 100 Tons Press | ||
| Highlight: | GI Custom Roll Forming Machine,Custom Roll Forming Machine 5.5KW,Recoiling Line | ||
Perforation & Recoiling Line for Upright Profile
This perforation and recoiling line is designed to punch the holes for the stips, then get the punched strips recoiled. The recoiled strips are prepared for forming upright profiles by roll forming machine.
| PERFORATION & RECOILING LINE FOR UPRIGHT PROFILE | |
| Material Specification | |
| Thickness | 1.5mm to 2.0mm or customized |
| Size | Customized |
| Material | GI, cold rolled steel |
| Yield strength | 550MPa or customized |
| Machine Components | |
| 3Ton*350mm Hydraulic Decoiler With Pre-leveler and Power Feed-in Device | |
| Load capacity | Max.3Tons |
| Coil inner-diameter | 510±30mm |
| Coil outer-diameter | 1500mm |
| Coil width | Max.350mm |
| Motor | 2.2KW |
| Option | Please refer to Decoiler on home page |
| Power Feed-in Rollers | |
| Pre-Level Device with 3 over 4 shafts to remove the Coil-set | |
| Power | 5.5KW |
| 100 Tons Press | |
| Servo motor feed-in device | 3KW |
| Quantity of pressing tools | 2 sets |
| Mateiral of pressing tool | Cr12Mov, heat treatment |
| Stroke | 45 times/min |
| Holes patten | Customized |
| Tensioner Device | |
| 3Ton*350mm Hydraulic Recoiler | |
| Coil inner hole expanding | Hydraulic system, 2.2KW pump motor |
| Driving motor with brake | 5.5KW |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.3Tons |
| Coil inner-diameter | 510±30mm |
| Coil outer-diameter | 1500mm |
| Coil width | Max.350mm |
| Up/down stroke of coil car | Max300mm |
| Forward/Backward stroke of coil car | Max. 1000mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| PLC Control System | |
| Function | Control the perforation automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Punching tolerance | ≤±1 mm |
| Control Voltage | 24V |
Technical Support and Service for Our Machines
We provide comprehensive technical support and service for our machines. Our team of experienced engineers and technicians can help you achieve optimal usage of the machine and maximize its performance.
If you have any questions or need technical support for our machines, please don't hesitate to contact us. We are here to help you.
Q 1: How can customers be assured that XIAMEN FUMING will deliver qualified roll forming machines?
A 1: Customers can send their technician or entrust a third party to XIAMEN FUMING’s factory to do machine inspection before delivery.
XIAMEN FUMING can send their engineers to the buyer’s factory for machine installation and commissioning.
Our roll forming machine is guaranteed for one year in correct operation and maintenance.
Q 2: How does the customer install the machine when it arrives?
A 2: Our engineers will go to your factory for machine installation and commissioning once you get your machine ready(including electricity, testing material, hydraulic oil, auxiliary staff, transport and lifting device, etc.), they will instruct your technician how to operate the machine. Online supports including video call will be provided if our engineers cannot visit your place because of pandemic.
Q 3: Does XIAMEN FUMING provide customized roll forming machines?
A 3: Yes, we design and make roll forming machines according to the latest market trend and the specific requirements suggested by customers.
Contact Person: Mrs. Shelby Chen
Tel: +86 18205983863
Fax: 86-592-6290-260
Skype
Telegram
